Product Description

Thanks to its high light output, the HDF-W30 FLEX offers impressive performance for large venues – even when there’s lots of ambient light. Designed for life on the road, the rugged and modular projector is easy to install and service. And when equipped with a rental frame, it can easily be stacked or rigged. Just like the RLM, HDX, HDF and FLM projector families, the HDF-W30 FLEX uses the TLD lens suite.

Stunning images for large screens

Geared with 3-chip DLP technology, single Xenon lamp illumination, and a high-contrast optical engine, the HDF-W30 FLEX makes no compromises on brightness, color accuracy, and stability. Its Xenon lamp color accuracy delivers the best performance required for premium large-screen projection. Plus, the projector’s also equipped with Barco’s cutting-edge ImagePRO technology for remarkable scaling power.

Choose your brightness

The HDF-W30 FLEX’s most remarkable benefit is that it offers FLEX brightness as standard. In this way rental companies have the flexibility to tune the projector’s brightness to a specific show – from 18,000 to 30,000 lumens in incremental steps of 2,000 lumens.

Low total cost of ownership

This projector produces its 30,000 lumens brightness with a single Xenon lamp. Compared to projectors with multiple lamps, managing the HDF-W30 FLEX is a breeze. Moreover, this not only makes it easier to align images during setup but servicing the projector and replacing the lamp also take less time – thus reducing total cost of ownership.

Ultra-bright, stunning images

  • High-contrast 3-chip DLP™ engine
  • WUXGA resolution (1,920 x 1,200)
  • 30,000 center lumens
  • Contrast ratio of 1,900:1
  • Xenon illumination
  • Standard FLEX brightness
  • ImagePRO technology inside (Athena scaler)
  • Dual-core warp engine

Built for the rental & staging industry

  • Fully sealed optics
  • Extended wireless control options
  • 3D ready
  • Preview mode on LCD display
  • Removable lamp house, power supply & electronics
  • Extended warping and blending
  • DMX-512 control
  • Native 3G HDSDI/SDI input
  • BarcoLink for progressive WUXGA 50/59.94/60 Hz signal distribution over a single BNC coax cable
  • Low video delay (broadcast live events)
  • Universal lamp house for all HDF projectors
  • Easy to set up, install, service and transport thanks to modular design

Low total cost of ownership

  • Geared with a single Xenon lamp for easy projector management, setup and servicing
  • Sealed engine with constant image quality over time
  • Customer can replace bulb
  • Power-saving mode
  • TLD lens suite that is fully compatible with the Barco RLM, HDX, HDF and FLM projector series

Product Specifications

  • Projector type: WUXGA 3-chip DLP digital projector
  • Technology: 0.96″ DMD™ x3 sealed DLP core
  • Resolution: 1,920 x 1,200 – 16:10 aspect ratio
  • Brightness: 30,000 center lumens / 28,000 ANSI lumens*
  • Contrast ratio: 1,900:1 (standard) / 2,200:1 (high contrast mode)
  • Brightness uniformity: 90%
  • ScenergiX: Horizontal and vertical edge blending
  • Lenses: TLD+ 0.73:1 ; 1.2:1 ; 0.8-1.16 ; 1.16-1.5:1 ; 1.5-2.0:1 ; 2.0-2.8:1 ; 2.8-4.5:1 ; 4.5-7.5:1 ; 7.5-11.5:1
    Optical lens shift: V: -30% to +120% / H: -40% to +40% on zoom lenses (memorized)
  • Color correction: P7
  • Lamps: 4.0 kW xenon
  • Lamp lifetime: 600 Hrs
  • Transport with lamp: Yes
  • Lamp house, quick replace: Yes
  • Customer bulb replace: Yes
  • Lamp warranty (field replace/ factory replace): 90 days, 500 hours / pro rata 500 hours
  • Optical dowser: Standard
  • Picture-in-picture: Two sources simultaneously
  • Orientation: table – ceiling – side (portrait)* – vertical / * lamp door down/bottom
  • DMX 512: standard
  • WARP: Direct adjust OSD + toolset
  • Integrated web server: Yes
  • CLO (constant light output): Standard
  • 3D: Triple flash up to 200Hz/Optional: active eyewear, passive Infitec, passive circular
  • Inputs: DVI-I (HDCP including analog RGB YUV), SDI/HDSDI/Dual HDSDI/3G/BarcoLink
  • Optional Inputs: 5-BNC RGBHV (RGBS/RGsB, YUV CS/SOY, Composite video, S-Video); DVI-I (HDCP including analog RGB YUV) + BarcoLink/SDI/HDSDI/Dual HDSDI/3G; 3D active input (HDMI/DisplayPort) feat. SENSIO 3D
  • Input resolutions: From NTSC up to QXGA (2,048 x 1,536)
  • Max. pixel clock: 200 MHz
  • Software tools: Projector Toolset + Android app + iOS app
  • Control: XLR wired + IR, RS232, Wifi, GSM (opt)
  • Network connection: 10/100 base-T, RJ-45 connection, Wifi (optional)
  • Power requirements: 200-240V / 50-60Hz
  • Max. power consumption: 4,800W / STBY < 10W
  • Noise level: (typical at 25°C/77°F) 60dB(A)
  • Operational ambient temperature: 0-40°C / 32°-104°F
  • Operational humidity: 0-80% (non condens)
  • Dissipation BTU: Max. 16,378 BTU/h
  • Dimensions (WxLxH): 707 x 1,025 x 548mm / 27.83 x 40.35 x 21.57 inches
  • Shipping Dimensions: (LxWxH)1,200 x 980 x 760 mm / 47.24 x 38.58 x 29.92 inches
  • Weight: 99kg (218.25lbs)/shipping weight from factory: 151kg (333lbs)
  • Standard accessories: Power cord,wireless/XLR wired rugged remote control,bottom rigging kit/clamps
  • Certifications: UL60950-1 and EN60950-1,FCC rules & regulations,part 15 Class A and CE EN55022 Class A,RoHS
  • Warranty: 3 years standard, extendable up to 5 years
  • *: +/- 10%